Mold Investigation Description:

Professional best practice recommends that mold investigations begin with a comprehensive property inspection. GPI mold investigations are conducted by Steve Zivolich, M.A., a Certified CREIA Inspector (CCI) of the California Real Estate Inspectors Association (CREIA), and ASHI certified inspector (American Association of Home Inspectors).
In addition, the GPI inspector is a nationally Certified Microbial Investigator (CMI). The CMI title is a national board certified designation by the American Indoor Air Quality Association, AmIAQC, The CMI certification requires extensive experience in mold investigations, successful completion of a full day exam, national board review of work products, ongoing training requirements, and ethical standard compliance. The CMI designation by AmIAQ is recognized by the California Department of Health and most insurance companies.

Mold Inspection Descriptions:

Limited: i.e. single area
The limited or single area inspection is to detect the presence of mold or other microbials such as bacteria or allergens in client defined area(s) of the home. This service provides a fast and economical method to determine if mold is present. This is a cost effective inspection for a buyer in escrow.

The inspection includes: A visual inspection of the area of concern and a determination of the source of contamination, as well as recommendations for interventions to stop the microbial growth. In addition, the following tests are conducted: moisture meter tests, laser particle test (measures invisible air particles that can indicate general air quality of the area), thermal imaging (allows thermal inspections of non-accessible wall areas that may have moisture or signs of past moisture).
A written on-site report of this investigation can be provided to the client. This report will provide recommendations for mold sampling that can be submitted to a certified microbiologist to determine the kind of mold, bacteria or allergens present.

If samples are approved by the client, a microbial remediation plan will be provided for the client. This report plan is required by any certified mold remediation company to remove the mold safely and effectively.
Types of testing include: Direct sample (if a mold like substance or stain is visible; this will tell us the type of molds present, this is the minimal test recommended); air quality testing (this tells us the quantity of mold spores present in the air; this is the vehicle for mold and allergy reactions).

The limitation of this service is that other sources of mold may be present in the home.

Whole House:

The value of this service is that it identifies, determines cause and provides correction recommendations for the presence of mold or other microbials such as bacteria or allergens in all area(s) of the home.
The inspection includes: A visual inspection of all areas of the home including specific areas of concern and a determination of the source of contamination, as well as recommendations for interventions to stop the microbial growth. In addition, the following tests are conducted: moisture meter tests, laser particle test (measures invisible air particles that can indicate general air quality of the area), thermal imaging (allows thermal inspections of non-accessible wall areas that may have moisture or signs of past moisture).

A written on-site report of this investigation can be provided to the client. This report will provide recommendations for mold sampling that can be submitted to a certified microbiologist to determine the kind of mold, bacteria or allergens present.

If samples are approved by the client, a microbial remediation plan will be provided for the client. This report plan is needed by any certified mold remediation company to remove the mold safely and effectively.
Types of testing include: Direct sample (if a mold like substance is visible; this will tell us the type of molds present, this is the minimal test recommended); air quality testing (this tells us the quantity of mold spores present in the air; this is the vehicle for mold allergy reactions).

Clearance Inspection and Testing:

The clearance inspection and testing is designed to determine the success of microbial remediation efforts.

The inspection includes: A visual inspection of the containment area. In addition, the following tests are conducted: moisture meter tests, laser particle test (measures invisible air particles that can indicate general air quality of the area), thermal imaging (allows thermal inspections of non-accessible wall areas that may have moisture or signs of past moisture).
Two air quality testing samples are collected in the containment area and compared to an exterior baseline air test. The air samples are submitted to certified microbial laboratory for testing and initial determination of remediation success. Based on the results of the inspection and laboratory testing, a clearance report is produced for the client.

GPI Preliminary Whole Property Mold Investigations Include a visual non-instrusive examination of:

Grounds: Grading, Drainage, Water supply, Sprinklers;

Structure: Exterior, Walls, Decks, Foundation;

Roof: Surface, Flashings, Gutters, Attic;

Heating/Cooling: Air Handler, Air Intake, Ducts, Carbon Monoxide Test;

Interior: Surfaces, Kitchen, Laundry, Water Heater, Bathrooms, Plumbing

Contact Information STEVE ZIVOLICH Guaranteed Property Inspection and Mold Investigation, Inc. http://www.gpinspect.com (949) 230-6800

toxic mold - Google News

High Point City Manager Orders All Fire Stations Inspected For Mold - WFMY News 2 High Point City Manager Orders All Fire Stations Inspected For Mold WFMY News 2 Lab samples showed two types of mold, one harmless and the other toxic. They believe it was caused by condensation from an air conditioning vent. ... and more »

Toxic cake mixes? Consider this overblown myth debunked - Taunton Daily Gazette Toxic cake mixes? Consider this overblown myth debunked Taunton Daily Gazette There have been a few documented cases of sickness and death, but the victims had severe mold allergies and ate two-year-old mixes exposed to mold. ... and more »

Firefighters Concerned Mold Problems Could be Widespread - My Fox 8 Firefighters Concerned Mold Problems Could be Widespread My Fox 8 HIGH POINT, NC (WGHP) - Several firefighters in High Point are concerned a toxic mold problem that was discovered at fire station on Barrow Road could be ... and more »

Town Hall project promises energy savings - York Weekly Town Hall project promises energy savings York Weekly SEABROOK ? While Town Hall is being rid of its toxic mold, the process stands to provide savings in energy as well. ... and more »

5 Steps to Mold Prevention and Eradication - Organic Authority (blog) 5 Steps to Mold Prevention and Eradication Organic Authority (blog) The above three steps will handle most mold problems, but in an extreme case like toxic black mold, you'll want to call in backup for help. ...

Weathering the mycotoxin storm - Ag Weekly Weathering the mycotoxin storm Ag Weekly Mycotoxins are produced by certain species of molds during environmental conditions that challenge or stress the mold. Molds are everywhere and are one of ...

Editor's Notes: Hopes and fears - Jerusalem Post Editor's Notes: Hopes and fears Jerusalem Post Would a peacemaker in the Sadat mold, some of those around the prime minister ask rhetorically, have deliberately spent the first nine months of the ... and more »

Prevent Toxic Mold Growth - WENY-TV Prevent Toxic Mold Growth WENY-TV The New York State Toxic Mold Task Force is seeking public comment on a report to the governor that recommends steps for mold prevention and awareness.

Communication Breakdown: Fire Chief Apologizes for Mold Issue - My Fox 8 Communication Breakdown: Fire Chief Apologizes for Mold Issue My Fox 8 Hazardous material crews have started working on the mold problem at Station No. 12 located on 4538 Barrow Road. The toxic mold was found in ceiling tiles ... High Point Fire Station Closed Due to MoldFireNews.net all 2 news articles »

A thick lawn can be yours with just a few steps - Washington Post Washington Post A thick lawn can be yours with just a few steps Washington Post Mowing or removing leaves greatly reduces the chance of having lawn diseases related to snow mold or other winter fungus. Weed Control: Thick turf is the ...

RSS integration by RSSinclude

Steve Zivolich
IH, MA, CMC

Lucky Z
V.P. Security

Qualifications and Experience

Over 4,000 Property Inspections and Mold Investigations

Industrial Hygienist, American Industrial Hygiene Association #163536

Asbestos Certified Building Inspector, AHERA, EPA

Certified CREIA Inspector, California Real Estate Inspection Association

Certified ASHI Inspector, American Society of Home Inspectors #244157

Council-Certified Microbial Consultant, American Indoor Air Quality Council

American IAQ Council Certification Board Member

IESO Standards Development Committee Member

Certified Partner of Environmental Data Resources

Field Instructor, Inspection Training Associates

EMF (Electric and Magnetic Field) consultant

Educationally Certified Inspector, ITA

RESNET Certified Energy Inspector

Better Business Bureau Member #12-13092605

Member, US Green Building Council

Steve Z. Arrives Green To Inspections In His Zero Emission Rated Prius

Where Does He Hide The Ladder?

Search and Map Real Estate Listings In Your Neighborhood